Yield components and bromatological composition of three Megathyrsus maximus cultivars in Guayas area, Ecuador
Contenido principal del artículo
Resumen
With the objective of evaluating the yield components and bromatological composition of three Megathyrsus maximus cultivars in Guayas area, Ecuador at different regrowth ages, the research was carried out, following a random block design with factorial arrangement (3x3) with five replications. The productivity (yields of total dry matter, leaves, stem and biomass), morphological components (plant height, length and width of leaves, number of leaves and stems) were studied; as well as the contents of DM, CP, NDF, ADF, ADL, cellulose (Cel), hemicellulose (Hcel), cellular
content (CC), P, Ca, ash, OM, DMD, OMD, ME, LNE and the relations NDF-N and ADF-N at the ages of 21, 42 and 63 days. Analysis of variance was performed according to experimental design. The highest yields of DM and biomass were obtained in Tanzania at 63 days of regrowth (2.74 and 8.25 t/ha, respectively). The highest DM and biomass yields were obtained in Tanzania at 63 days of regrowth (4.18 and 12 t/ha, respectively). The CP and CC decreased with the maturity of the plant and the best values were obtained in Tanzania at 21 days of regrowth (15.67 and 62.16 %, respectively), while the components of the cell wall increased with age and Tanzania showed the best values. There was significant interaction between varieties and maturity (P <0.0001) for all indicators. It is concluded that the studied varieties show adequate productive performance under conditions of low rainfalls. The Tanzania and Tobiata cultivars are a good option to replace the food deficit during the dry period due to its higher proportion of leaves, better relations NDF-N and ADF-N that give it higher quality.
Key words: yield, regrowth age, Megathyrsus maximus, chemical composition, digestibility, energy
content (CC), P, Ca, ash, OM, DMD, OMD, ME, LNE and the relations NDF-N and ADF-N at the ages of 21, 42 and 63 days. Analysis of variance was performed according to experimental design. The highest yields of DM and biomass were obtained in Tanzania at 63 days of regrowth (2.74 and 8.25 t/ha, respectively). The highest DM and biomass yields were obtained in Tanzania at 63 days of regrowth (4.18 and 12 t/ha, respectively). The CP and CC decreased with the maturity of the plant and the best values were obtained in Tanzania at 21 days of regrowth (15.67 and 62.16 %, respectively), while the components of the cell wall increased with age and Tanzania showed the best values. There was significant interaction between varieties and maturity (P <0.0001) for all indicators. It is concluded that the studied varieties show adequate productive performance under conditions of low rainfalls. The Tanzania and Tobiata cultivars are a good option to replace the food deficit during the dry period due to its higher proportion of leaves, better relations NDF-N and ADF-N that give it higher quality.
Key words: yield, regrowth age, Megathyrsus maximus, chemical composition, digestibility, energy
Detalles del artículo
Cómo citar
Méndez-Martínez, Y., Reyes-Pérez, J. J., Luna-Murillo, R., Verdecia, D. M., Rivero-Herrada, M., Montenegro-Vivas, L., & Herrera, R. S. (2019). Yield components and bromatological composition of three Megathyrsus maximus cultivars in Guayas area, Ecuador. Cuban Journal of Agricultural Science, 53(4). Recuperado a partir de https://cjascience.com/index.php/CJAS/article/view/928
Sección
Ciencia de los pastos y otros cultivos
Aquellos autores/as que tengan publicaciones con esta revista, aceptan los términos siguientes:
- Los autores/as conservarán sus derechos de autor y garantizarán a la revista el derecho de primera publicación de su obra, el cuál estará simultáneamente sujeto a la Licencia Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) que permite a terceros compartir la obra siempre que se indique su autor y su primera publicación esta revista. Bajo esta licencia el autor será libre de:
- Compartir — copiar y redistribuir el material en cualquier medio o formato
- Adaptar — remezclar, transformar y crear a partir del material
- El licenciador no puede revocar estas libertades mientras cumpla con los términos de la licencia
Bajo las siguientes condiciones:
- Reconocimiento — Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.
- NoComercial — No puede utilizar el material para una finalidad comercial.
- No hay restricciones adicionales — No puede aplicar términos legales o medidas tecnológicas que legalmente restrinjan realizar aquello que la licencia permite.
- Los autores/as podrán adoptar otros acuerdos de licencia no exclusiva de distribución de la versión de la obra publicada (p. ej.: depositarla en un archivo telemático institucional o publicarla en un volumen monográfico) siempre que se indique la publicación inicial en esta revista.
- Se permite y recomienda a los autores/as difundir su obra a través de Internet (p. ej.: en archivos telemáticos institucionales o en su página web) antes y durante el proceso de envío, lo cual puede producir intercambios interesantes y aumentar las citas de la obra publicada. (Véase El efecto del acceso abierto).